#DIPTRACE IMPORT EAGLE LIBRARY HOW TO#

' command, open the 'Open CAM Job' dialog box, select one of the 'gerb274x.cam' and click 'Open' After it is loaded, click the 'Process Job' command to generate the corresponding Gerber file: In the 'CAM Processor' dialog box, select 'File' -> 'Open' -> 'Job. ' command, open the 'Open CAM Job' dialog box, select the 'excellentone.cam' and click 'Open' button.Īfter loading it, click the 'Process Job' command to generate the corresponding drill file: brd file, and then click the 'File' menu to open the 'CAM Processor' dialog box. To create a Gerber file in Eagle, you should run the drillcfg command first:įile ->Run ULP -> the pop-up 'Drill Configuration' dialog box and click the 'OK' button to generate the corresponding drill configuration file. After following the 4 steps you will have all the necessary files needed for PCB manufacturing. If there is any milling design in your brd file, please add extra outline layer and check the'Dimension' /span> 'Milling'. When your PCB has double sides silkscreen, you need to add the bottom layer as well (Dimension, bPlace and bName). *īefore generating Gerber files from Eagle, firstly you need to confirm the silkscreen is on single side or double sides, because only the top silkscreen layer (tPlace and tNames) would be generated by default in Eagle software. *If you are using the lastest version of Eagle software ( Eagle 9.20 or higher ), please take a reference of THIS POST. brd file, then you can upload it to PCBWay online system for fabrication.

#DIPTRACE IMPORT EAGLE LIBRARY HOW TO#

In this tutorial, we are going to show you how to export Gerber files from your eagle. At this point you can put the new libraries in the library path (if they aren't already) and mark them as in use in the control panel and then you should see all the parts you need have been made accessible.Generally it doesn't work to use the Eagle files for PCB manufacturing, so the situation will be better if you can send the Gerber files directly to a PCB fab. It should go ahead and create your libraries for you without too many (or any) additional questions. You can also select/deselect libraries by clicking on the row to toggle the export status or using the various buttons to help with bulk toggles so you can quickly narrow down the export to just the libraries you need.Ĭhoose a suitable output path and then click ok.

For what you are trying to do I would choose to export multiple libraries. In 9.1.1 the procedure is as follows:įrom there you will see a window like the following:įrom here you can select whether to export to multiple libraries (this maintains the libraries as described in the board) or to create one combined library for the parts in the board.

I'm not sure what version of EAGLE you are using but it looks like Pedro is using an older version as the export tool has changed quite a bit compared to the version in his example.

As Pedro states, you can export the libraries used in a design very easily.

Diptrace import eagle library